New York State of Opportunity

Canal Maintenance Shop Supervisor 2

Written Test To Be Held
January 11, 2020
You may be assigned to either Saturday or Sunday.
Please refer to the information below.
Applications Must Be Submitted or Postmarked By
November 26, 2019

 

Exams Included on This Announcement
Exam Number Exam Title Open to Employees of Salary Salary Grade Non−Refundable Processing Fee (Waivers available)
38-621 Canal Maintenance Shop Supervisor 2 Canal Corporation $54,639 Equated to SG-17 $15
You may be assigned to either Saturday or Sunday to take your test. The Department of Civil Service reserves the right to administer tests either online or with paper booklets and answer sheets. Your admission notice will tell you whether your test will be administered online. You cannot request a day in advance or change your scheduled day.

IMPORTANT: Unless waived, you must pay the non-refundable processing fee. For information on fee waivers, visit https://www.cs.ny.gov/examannouncements/types/oc/appinfo.cfm##Fee. It is important that you verify that you entered the correct examination number and title on your online or paper application prior to submitting. If you apply online, you should immediately review your email confirmation notice to verify that you applied for the correct examination. If you do not receive a confirmation number after submitting your online application, your application was NOT received by the Department of Civil Service. No late applications will be accepted after the filing deadline has passed.

Promotion examination open to all qualified employees of the New York State Canal Corporation.

Back To Top

Minimum Qualifications

On or before January 11, 2020, you must be a qualified employee of the New York State Canal Corporation and have had three months of permanent competitive, non-competitive (including 55-b/55-c), or labor class service as a Canal Maintenance Shop Supervisor 1, Machinist, Trades Specialist (Machinist), Motor Equipment Mechanic, Service and Repair Mechanic (Motor Equipment), Steel Fabricator, Welder or Trades Specialist (Welder).

Only the title or titles listed are qualifying.

If you were permanently appointed to a qualifying title on or before October 11, 2019, and have served continuously in this title since that date, you are eligible to file for this examination.

Qualifying Experience for Appointment from the Eligible List

After one year of the service described in the Minimum Qualifications, successful candidates will be qualified for appointment from the eligible list.

Notes

  1. In accordance with Section 52.11 of the Civil Service Law, individuals serving permanently in the non competitive or labor class in a qualifying title (including those serving under Section 55-b/55-c) who otherwise meet the requirements for taking this examination are eligible to compete in this promotion examination.
  2. This examination is being held on a promotion and open-competitive basis. If you are admitted to the promotion examination under anticipated eligibility (i.e., you do not have the required one year of Qualifying Experience For Appointment From The Eligible List) and if you meet the open-competitive minimum qualifications, you may also be admitted to the open-competitive examination. To be admitted, you must apply for the open-competitive examination according to the instructions given on the open-competitive announcement. Once you meet the required one year of qualifying service for appointment from the promotion list, you will not be eligible for appointment from the open-competitive eligible list.
  3. You must possess a valid license to operate a motor vehicle in New York State at the time of appointment and continuously thereafter.

Back To Top

Subject of Examination

There will be a written test which you must pass in order to be considered for appointment. The written test is designed to test for knowledge, skills, and/or abilities in such areas as:

  1. Supervision - These questions test for knowledge of the principles and practices employed in planning, organizing, and controlling the activities of a work unit toward predetermined objectives. The concepts covered, usually in a situational question format, include such topics as assigning and reviewing work; evaluating performance; maintaining work standards; motivating and developing subordinates; implementing procedural change; increasing efficiency; and dealing with problems of absenteeism, morale, and discipline.
  2. Principles and practices of machine shop operation - These questions test for knowledge of the principles of operation of the various types of equipment used in a typical machine shop, including work layout and safe operating practices. Questions may cover the ability to read and understand typical blueprints and sketches.
  3. Machine tools, equipment and processes used in the fabrication of components for mechanical equipment - These questions test for knowledge of machine tool operation, including procedures used in parts fabrication and finishing.
  4. Metals and metal treatment, including brazing and welding - These questions test for knowledge of the characteristics of various types of metals typically worked on in a machine shop and for knowledge of typical metal working and treatment processes including such operations as cutting, welding, brazing, soldering, annealing, grinding, and heat treating.
  5. Work planning and scheduling - These questions test for knowledge of the principles used in developing and implementing work plans and for the ability to arrange work assignments in a manner that will achieve work goals while staying within scheduling criteria. This may include setting up vacation or work schedules, taking into consideration such factors as seniority, work skills, duty hours, and shift coverage.

If you pass, your seniority credit(s), if any, will be included in the computation of your final score. Rank on the eligible list will be determined after adding any wartime Veterans' credits to your final passing score.

Credit for Seniority

Seniority is credited at the rate of one credit for each five-year period (or fraction thereof), excluding the first year of service.

Back To Top

Duties

As a Canal Maintenance Shop Supervisor 2, you would plan and supervise the work of a large number of journey-level trade workers and assistants in the repair and maintenance of canal mechanical equipment and in the mechanical repair of electrical equipment. You would conduct weekly safety meetings and ensure employees follow established safety practices. You would inspect the equipment, both on shore and on floating plants, to determine necessary repairs and design special jigs and fixtures as required. You would also design and manufacture special canal equipment such as lock gates and valves, trash racks, dam gates, shafts and bearings, and supervise the repair of parts for water turbines, tractors, compressors, cranes, shovels, dredging equipment, etc. You will be responsible for the scheduling of preventative maintenance and repairs to gasoline- and diesel-powered vehicles, construction equipment, and light marine vessels. Appointees will be responsible for the inventory management controls for a canal section. The appointee must have basic computer skills to operate project and maintenance tracking software programs.

Important: The Department of Civil Service and other state agencies may communicate with you through email correspondence. This may include the notification of your examination results and canvassing you for interest in appointment. It will be important for you to keep your email address, phone number and mailing address current by logging into https://www.cs.ny.gov/home/myaccount.

Back To Top

How To Apply

This announcement is for viewing purposes only.

Additional Information

New York State is an Equal Opportunity Employer

It is the policy of the State of New York to provide for and promote equal opportunity employment, compensation, and other terms and conditions of employment without unlawful discrimination on the basis of age, race, color, religion, disability, national origin, gender, sexual orientation, veteran or military service member status, marital status, domestic violence victim status, genetic predisposition or carrier status, arrest and/or criminal conviction record, or any other category protected by law, unless based upon a bona fide occupational qualification or other exception.

Religious Accommodation

Most written tests are held on Saturdays. If you cannot take the test on the announced test date, due to a conflict with a religious observance or practice, check the box under “Religious Accommodation.” We will make arrangements for you to take the test on a different date (usually the following day).

Reasonable Accommodations in Testing

It is the policy of the Department of Civil Service, in accordance with the New York State Human Rights Law and the Americans with Disabilities Act, to provide qualified persons with disabilities equal employment opportunity and equal opportunity to participate in and receive the benefits, services, programs, and activities of the Department. It is the policy of the Department to provide such persons reasonable accommodations and reasonable modifications as are necessary to provide equal opportunity. Persons with disabilities who require an accommodation to participate in an examination must note this on their application. Further information is available from the Test Administration Unit of the Department of Civil Service. In the Albany area, call 518-457-2487. Outside of the Albany area, call toll free at 1-877-697-5627. For TDD services, call NY Relay at 711 (requires a fee) or 1-800-662-1220.

Admission to Examination

Notice to appear for the test may be conditional as review of applications may not be made until after the test. If you have not received your notice to appear for the written test three days before the date of the test, email us at AdmissionNotices@cs.ny.gov. Please provide your first and last name, address, and the last four digits of your social security number, and we will provide you with the information you need to attend your written test. If you have an issue other than not receiving your admission notice, please contact our office at (518) 474-6470 in the Albany area or toll free at 1-877-697-5627. Please leave a clear concise message and provide your first and last name, last four digits of your social security number and a daytime phone number.

Taking State and Local Examinations Scheduled for the Same Day

If you have applied to take a written test announced by either one or several local jurisdictions (county, town, city) scheduled to be held on the same test date as this written test, you must notify each of the local jurisdictions no later than two weeks before the test date to make arrangements for taking all tests at one test site. All tests will be held at the state examination center. For your convenience, contact information for all local civil service agencies is available on our website at: https://www.cs.ny.gov/jobseeker/local.cfm.

Eligibility for Examination

To be considered a qualified employee eligible to compete in this examination, you must be employed in, or on leave from, the specified department or agency on a permanent or contingent permanent basis in the competitive class, or in the non-competitive class or labor class if specifically noted on this announcement (or be on an appropriate preferred list), and have the specified time in the specified title or salary grade. You may not compete in a test for a title if you are permanently employed in that title (unless you are still on probation) or in a higher direct line of promotion.

Cell Phones or Electronic/Communication Devices at the Test Site

Do not bring cell phones, beepers, headphones, or any electronic or other communication devices to the test site. The use of such devices at the test site in the test room, hallways, restrooms, building, grounds, or other areas could result in your disqualification.

SS2/TC3 LJT-dah
Issued: 10/25/2019

This announcement is subject to amendment or cancellation without notice. Do not copy it, or post it to any other site, but link to it instead.

Back To Top