ARS Online Manual
Corrective
The Corrective page within Incident Data indicates actions taken by agency personnel and/or health and safety officers in order to correct the hazardous condition that might have resulted in the incident.
Begin to complete the page by clicking the magnifying glass for Hazard.
Select the Description that best describes the hazardous condition which caused the incident.
Both the Hazard ID and cause of the hazard will automatically populate. Additional hazards can be added by clicking the Plus icon.
Next, select the Category of the consequent action taken to correct the hazardous condition.
Select the Status of the action that will be taken.
Enter the specific Action that will be taken to correct the hazardous condition.
Enter an Estimated completion date of when the action will occur.
Enter the Actual completion date when the Status of the action is Completed.
Additional actions can be added by clicking the Plus icon.
Once any changes are entered, click Save.